Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21f
93755
93755
Advertisement
Related Manuals for Central Pneumatic 93755
Summary of Contents for Central Pneumatic 93755
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com 93755 93755 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.
-
Page 2: Table Of Contents
2. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 93755... -
Page 3: Safety
Service 1. Tool service must be performed only 2. When servicing a tool, use only identical by qualified repair personnel. replacement parts. Use only authorized parts. Item 93755 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Specifications
Gauge Range 0 - 22 PSI Suction Cup 44″ L x 1-1/4″ Diameter Air Inlet 1/4″ NPT(F) Reel Outlet Size 1/4″ NPT(F) Hose Fittings 1/4″ NPT(M) Max Pressure 10 PSI Page 4 For technical questions, please call 1-888-866-5797. Item 93755... -
Page 5: Setup
However, it is a good safety measure to attempt to discharge the tool in a safe fashion after disconnecting to ensure that the tool is disconnected and not powered. Item 93755 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 Page 6 For technical questions, please call 1-888-866-5797. Item 93755...
- Page 7 Item 93755 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Knob. To increase air pressure, turn the Knob clockwise. To decrease the air pressure, turn the Knob counterclockwise. Do not exceed 10 PSI. FILTER Figure E: Air Compressor Setup Page 8 For technical questions, please call 1-888-866-5797. Item 93755...
-
Page 9: Maintenance
When finished, disconnect the air compressor, releasing all remaining pressure from the Pump. Remove the Pump from the container of detergent/solvent. Then, thoroughly dry the Pump. Item 93755 For technical questions, please call 1-888-866-5797. Page 9... - Page 10 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 10 For technical questions, please call 1-888-866-5797. Item 93755...
-
Page 11: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175451507 when ordering parts. Item 93755 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.