Table of Contents
Advertisement
[For[the[United[Kingdom,[Republic[of[Ireland[and[Continental[Europe]
Declaration of Conformity (DoC)
Hereby, "Panasonic Corporation" declares that this product is
in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our
R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact in the EU: Panasonic Services Europe, a Division of
Panasonic Marketing Europe GmbH,
Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg,
Germany
This product is intended to be used in the following countries.
Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary,
Ireland, Italy, Iceland, Liechtenstein, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, United Kingdom, Switzerland
This product is intended for general consumer. (Category 3)
The WLAN feature of this product shall exclusively be used
inside buildings.
This product on purpose to connect to access point of
2.4 GHz or 5 GHz WLAN.
32
VQT2J83
Network Easy Setting
Setting for when this unit is used connected to a network.
≥ After completing "Easy Setting" (
"Network Easy Setting". (
Preparation
Connect to a broadband network. (
1
Press [SETUP].
2
Press [3, 4] to select "Network" and press
[OK].
3
Press [3, 4] to select "Network Easy
Setting" and press [OK].
4
Select "Wired" or "Wireless" and press
[OK].
Network Easy Setting (Connection Test)
Select a connection mode.
Current setting
: Wired
LAN cable connection:
Connect a LAN cable to the unit and select "Wired".
Wireless LAN connection:
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select "Wireless".
Wired
Wireless
OK
RETURN
∫ "Wired" connection
Follow the on-screen instructions to make your connection
settings.
≥ When you experience problems (
∫ "Wireless" connection
If you select "Wireless" and "Wireless LAN Adaptor is not
connected." is displayed, check that the Wireless LAN Adaptor
is fully inserted. Alternatively, disconnect and reconnect it. If
there is still no change in the display, consult your dealer for
advice.
Select "WPS (PUSH button)" or "Search for
access point" and then follow the on-screen
instructions and make the settings.
Access Point Connection Setting
Select a connection method for access to
Wireless LAN.
Please refer to the operating instructions of
the access point about connection methods.
WPS (PUSH button)
Search for access point
WPS (PUSH button):
If your Wireless router (Access point) supports
WPS (PUSH button), you can easily perform
the settings by pressing WPS button on it.
WPS (Wi-Fi Protected Setup) is a standard
that facilitates settings relating to the
connection and security of wireless LAN
devices.
1 Press WPS button or corresponding button of Wireless
router (Access point) until the lamp starts flashing.
≥ For details, refer to the operating instruction of Wireless
router (Access point).
2 Press [OK].
* Wi-Fi Protected Setup-compatible Wireless router (Access
point) may have the mark.
11), you can continue with
Go to step 4)
31)
33)
e.g.,
Advertisement
Table of Contents
