Connecting To A Broadband Network - Panasonic DMP-B500 Operating Instructions Manual

Connecting to a
Networ k
broadband network
The following services can be used when this unit is connected
to broadband.
– Firmware can be updated (
– You can enjoy the BD-Live (
– You can enjoy the VIERA CAST (
– DLNA feature ( 36)
≥ For details about connection method, refer to the instructions
supplied with the connected equipment.
≥ The unit is not compatible with public wireless LAN services
(Hotspot etc.) provided in airports, stations, cafes etc.
Using LAN (ethernet) cable
LAN L
(10/100)
LAN Cable
(Straight)
(not supplied)
≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
35)
18)
34)
Broadband router, etc.
Internet
Using Wireless LAN Adaptor
Wireless router
(Access point), etc.
Internet
* Use the L-Shaped USB Connector depending on the
installation.
≥ Wireless LAN Adaptors other than the supplied Wireless LAN
Adaptor cannot be used.
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
Precautions of Wireless LAN Adaptor
The following limits are in place regarding the usage of this
device. You must be aware of these limits before using this
device.
Panasonic will in no way be responsible for any incidental
damage which may arise due to a failure to obey these limits,
or to any condition of use or disuse of this device.
≥ Do not use this device to connect to any wireless
network for which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID*) for which you do not
have usage rights may be displayed; however, using these
networks may be regarded as illegal access.
* An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network. Transmission
is possible if the SSID matches for both devices.
≥ Data transmitted and received over radio waves may be
intercepted and monitored.
≥ This wireless LAN adaptor contains delicate electronic
components.
Please use this adaptor in the manner in which it was
intended and follow the following points.
– Do not expose the adaptor to high temperatures or direct
sunlight.
– Do not bend, or subject the adaptor to strong impacts.
– Keep the adaptor away from moisture.
– Do not disassemble or alter the adaptor in any way.
– Do not attempt to install the adaptor in any incompatible
device.
Wireless LAN Adaptor
(supplied)
L-Shaped USB Connector*
(supplied)
31
VQT2J83