Timer Function - Samsung MAX-KT65 Instruction Manual

3 dvd karaoke mini component system dvd/vcd/cd/mp3-cd/cd-r/rw playback
Table of Contents

Advertisement

Timer Function

The timer enables you to switch the system on or off at specific times.
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
Switch the system
1
on by pressing
STANDBY/ON.
4
Set the timer
switch-on time.
a. Set the hour by pressing
button.
b. Press ENTER .
The minutes flash.
c. Set the minutes by pressing
button.
d. Press ENTER.
OFF TIME is displayed (instead
of the equalizer symbols) for a few
seconds, followed by any switch-
off time already set; you can now
set the timer switch-off time.
Press
or
7
to select the source to
be played when the
system switches on.
TAPE (cassette) : Insert a cassette
tape.
TUNER (radio) : a Press ENTER.
b Select a preset
station by pressing
DVC-OK : Load a compact disc.
If the timer switch on and off times are identical, the word ERROR is displayed.
Note
You can also use
in step 4,5,6,7.
Press TIMER/ CLOCK
2
until TIMER is
displayed.
5
Set the timer
switch-off time.
or
a. Set the hour by pressing
button.
b. Press ENTER.
The minutes flash.
or
c. Set the minutes by pressing
button.
d. Press ENTER.
VOL 10 is displayed, where 10
corresponds to the volume
already set.
8
Press ENTER to
button
confirm the timer.
or
.
,
button on the remote control to instead Multi Jog or
3
Press the ENTER
button.
ON TIME is displayed (instead
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
Press
6
button to adjust the
volume level and
press ENTER.
or
The source to be selected is
displayed.
or
Press STANDBY/ON
9
to set the system to
standby mode.
is displayed to the top right of
the time, indicating that the timer
has been set.
The system will switch on and off
automatically at the required
times.
button
or
66

Advertisement

Table of Contents
loading

Table of Contents