Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Switch the system
1
on by pressing
POWER button.
When the correct
4
hour is displayed,
press ENTER.
The minutes flash.
•
Increase the minutes :
•
Decrease the minutes :
15
2
Press TIMER/CLOCK
twice.
•
CLOCK is displayed.
When the correct
5
time is displayed,
press ENTER.
•
"TIMER" appears in the display.
•
The current time is now set.
3
Press ENTER.
The hour flashes.
•
Increase the hours :
•
Decrease the hours :
Note
•
You can display the time, even
when you are using another
function, by pressing
TIMER/CLOCK once.
•
You can also use Multi-Jog or
button on the Remote
control instead of
buttons in step 3,4.