Watch 3D - Philips HD TV User Manual

Note: Program guides are available in certain
countries only.
Set program guide
Before you use the program guide, check
these settings:
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Programme guide].
3. Select [From the broadcaster], then press
OK.
Access the TV program guide
1. Press .
2. Select [Programme guide], then press
OK.
Use TV program guide options
You can customize the displayed information
to:

Remind you when programs start

Display only preferred channels
1. In the program guide, press
2. Select an option, then press OK:

[Change day]: Select the day to display.

[More info]: Display program
information.

[Search by genre]: Search TV programs
by genre.

Watch 3D

What you need
Supported on XXHFL7007D only.
Your TV is a 3D TV. Before you watch 3D,
read the health warning information in Get
started > Important information > 3D
Health warning (Page 7).
To watch 3D on this TV, you need the
Philips Easy 3D passive glasses that are
included with this TV. You can purchase
additional Philips 3D glasses PTA416 (sold
separately) from your local dealer.
Note:

Passive 3D glasses from other
manufacturers may not work or may
offer less than optimal 3D viewing.
EN 14
OPTIONS.

Do not use the 3D glasses for any
purpose other than watching 3D TV.
To experience the best 3D effect while you
watch 3D programs:

Watch the TV away from direct
sunlight.

Sit at a height where the center of the
TV screen is at your eye level.

Sit at a distance that is at least three
times the width (w) of the TV screen.
Do not sit more than 6m away.
Watch content
Select a source with 3D
For 3D discs:
1. Play the disc on a 3D Blu-ray disc player
that is connected to the TV HDMI
connector.
2. Press , then select the 3D Blu-ray disc
player.
For 3D TV programs:
Select [Watch TV] and switch to a TV
channel that broadcasts 3D content.
Switch on 3D
The first time the TV detects a broadcast 3D
signal, an onscreen message prompts you to
choose your preference.

If you want the TV to switch to 3D
automatically, select [Automatic].

If you want to be notified first, select
[Notify].