Set Up Your Tv; Note For Professional Installers; Picture And Sound - Philips HD TV User Manual

5 Set up your TV

Note for professional
installers
These settings are accessible to guests. They
can also be accessed in the professional
mode menu by selecting [TV setup].

Picture and sound

More picture settings
You can change the settings in the Picture
menu.
1. Press .
2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to adjust, then press OK.
Note: Options marked with an * are
available for certain models only.

[Smart picture]: Access predefined
smart picture settings.

[Reset]: Reset to default factory
settings.

[Backlight contrast]: Adjust the
contrast of the TV backlight.

[Brightness]: Adjust the intensity and
details of the dark areas.

[Colour]: Adjust the level of color
saturation.

[Hue]: Compensate color variations in
NTSC transmissions.

[Sharpness]: Adjust sharpness in the
image.

[Noise reduction]: Filter and reduce
noise in the image.

[Tint]: Adjust the color balance in the
image.

[Custom tint]: Customize tint setting.

[Pixel Plus HD] / [Pixel Precise HD]*:
Control advanced settings to fine-tune
each pixel to match surrounding pixels.
This setting produces a brilliant, high
definition image.
- [HD Natural Motion]*: Reduce
motion judder and reproduces smooth
motion.
- [Clear LCD]*: Enable superior
motion sharpness, better black level, high
contrast with a flicker-free, quiet image and a
larger viewing angle.
- [Super resolution]: Enable
superior sharpness, especially on lines and
contours in the picture.
- [Dynamic contrast]: Set the level
at which the TV automatically enhances
details in the dark, middle and light areas of
the picture.
- [Dynamic backlight]: Reduce
power consumption by dimming the TV
backlight to match room lighting conditions.
- [MPEG artefact reduction]:
Smoothen the digital transitions in the
picture.
- [Colour enhancement]: Set the
colors to be more vivid and improve the
resolution of details in bright colors.
- [Gamma]: Non-linear setting for
picture luminance and contrast.
- [Video contrast]: Change the
intensity of the bright areas, keeping dark
areas unchanged.

[PC mode]: Allow picture settings to
be changed when a PC is connected to
the TV through HDMI.
If enabled, you can select [Picture
format] > [Unscaled] which provides
maximum detail for display of PC
content.

[Light sensor]: Adjust settings
dynamically to match lighting conditions.

[Picture format]: Change the picture
format.

[Screen edges]: Change the picture
size.
EN 31