Removing The 3C905B-Tx Nic Pace And 3Nicdiags Software; Windows 95 And Windows Nt 4.0; Dos; Checking The Remote Wake-Up Function - 3Com XL PCI User Manual

Removing the 3C905B-TX NIC PACE and 3NICDIAGS Software

Removing the 3C905B-TX NIC PACE and
3NICDIAGS Software
You can remove the PACE and 3NICDIAGS software from
your PC using Windows 95, Windows NT, or DOS.

Windows 95 and Windows NT 4.0

To remove the PACE and 3NICDIAGS software, follow these
steps:
1 In the Windows Control Panel, select Add/Remove
Programs.
2 Select 3Com NIC Diagnostic Utilities.
3 Click Add/Remove.
The 3C905B-TX NIC software is removed from your PC.

DOS

To remove the PACE and 3NICDIAGS software, follow these
steps:
At the DOS prompt, enter:
un3c90x.exe
The program removes the 3C905B-TX software.

Checking the Remote Wake-up Function

If the PC does not boot up when a Magic Packet
packet is sent, perform these general troubleshooting steps:
1 Verify that the Wake on Link and Wake on Magic
Packet settings are enabled.
a Click the Network Neighborhood icon.
b Click Properties.
c Double-click the 3Com NIC icon and click the
Advanced tab.
Make sure that Wake on Link and Wake on Magic Packet
are enabled. If these settings do not exist, either the NIC
is not a Remote Wake-Up NIC or the driver installation file
is outdated. For the latest 3C905B-TX drivers and
installation files, download EtherDisk diskette 3.1 or later
from the 3Com Web site:
http://www.3com.com/
4-11
™
wake-up