Removing Nic Software; Windows 95 And Windows 98; Windows Nt 4.0 - 3Com EtherLink 3C905C-TX User Manual

64 C
HAPTER

Removing NIC Software

This section describes how to remove the 3C905C NIC
driver and software from your PC. This section also applies
to removing older NIC drivers from your PC.
CAUTION: If you want to reinstall the NIC driver and
software, you must first remove the software, as described
in this section.

Windows 95 and Windows 98

To remove NIC software from a PC running Windows 95 or
Windows 98:
1 Double-click the My Computer icon, then the
Control Panel icon, and then the System icon.
2 Click the Device Manager tab.
3 Double-click Network adapters.
4 Highlight the name of the NIC.
5 Click Remove.
6 Click OK to confirm the device removal.
You are prompted to restart the PC.

Windows NT 4.0

To remove NIC software from a PC running Windows NT 4.0:
1 Double-click the My Computer icon, then the
Control Panel icon, and then the Network icon.
The Network screen appears.
2 Click the Adapters tab.
3 Highlight the name of the NIC in the
Network Adapters box, and then click Remove.
6: T
ROUBLESHOOTING AND
If you are physically removing the NIC from the PC,
click No. Do not restart the PC until you shut down the
system, turn the power off, and remove the NIC from
the PC.
If you are reinstalling the NIC software, click Yes to
restart the PC.
D
IAGNOSTICS