FUNCTIONAL
DESCRIPTION
1. Switch trigger
OFF
1. Switch lever
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Switch action
006307
FOR MODEL HR4011C
CAUTION:
•
Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
1
To start the tool, simply pull the switch trigger. Release the switch trigger to
stop.
FOR MODELS HR4010C/ HR4001C
Trigger switch
CAUTION:
•
Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
•
This switch functions when setting the tool in
modes.
To start the tool, simply pull the switch trigger. Release the switch trigger to
stop.
Slide switch
CAUTION:
•
Before plugging in the tool, always check to see that the tool is switched
off.
•
This switch functions only when setting the tool in
mode.
When using the tool in the hammering mode for a long time, the slide switch is
006308
available. To start the tool, push the "I (ON)" side of the switch lever. To stop
1
the tool, push the "O (OFF)" side of the switch lever.
ON
symbol and
symbol
symbol action
5