Makita HR4001C Instruction Manual page 10

HR4001C
2
HR4010C
3
1. Change lever
2. Pointer
3. Lock button
1
HR4011C
3
1. Pointer
2. Change lever
3. Lock button
HR4001C
HR4010C
1. Change lever
2. Pointer
3. Lock button
1
HR4011C
1. Pointer
2. Change lever
3. Lock button
10
Bit angle (when chipping, scaling or demolishing)
006319
The bit can be secured at 12 different angles. To change the bit angle, depress
the lock button and rotate the change lever so that the pointer points to the
symbol. Turn the bit to the desired angle.
1
006320
2
Depress the lock button and rotate the change lever so that the pointer points
006321
to the
2
ing it slightly.
3
1
006322
3
2
symbol. Then make sure that the bit is securely held in place by turn-