Makita BTD130F Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Impact Driver
  5. BTD130F
  6. Instruction manual
Makita BTD130F Instruction Manual

Makita BTD130F Instruction Manual

Hide thumbs Also See for BTD130F:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Cordless Impact
Driver
MODEL BTD130F
MODEL BTD140
006666
I N S T R U C T I O N
M A N U A L
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Advertisement

Table of Contents
loading

Related Manuals for Makita BTD130F

Summary of Contents for Makita BTD130F

  • Page 1 Cordless Impact Driver MODEL BTD130F MODEL BTD140 006666 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    Responsible manufacturer: returned environmentally Makita Corporation Anjo Aichi Japan compatible recycling facility. Intended use The tool is intended for screw driving in wood, metal and plastic. For European countries only...

  • Page 3: General Safety Rules

    GENERAL SAFETY RULES GEA002-2 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

  • Page 4: Specific Safety Rules

    19. Store idle power tools out of the reach of chil- 24. Recharge only with the charger specified by the dren and do not allow persons unfamiliar with manufacturer. A charger that is suitable for one the power tool or these instructions to operate type of battery pack may create a risk of fire when the power tool.

  • Page 5: Important Safety Instructions

    ENC007-2 IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE Before using battery cartridge, read all instruc- tions and cautionary markings on (1) battery charger, (2) battery, and (3) product using bat- tery. Do not disassemble battery cartridge. If operating time has become excessively shorter, stop operating immediately.

  • Page 6: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 006667 • Always switch off the tool before insertion or removal of the battery cartridge.
  • Page 7 Reversing switch action 006248 This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled.

  • Page 8: Operation

    Hook 006251 The hook is convenient for temporarily hanging the tool. This can be installed on either side of the tool. To install the hook, insert it into a groove in the tool housing on either side and then secure it with a screw. To remove, loosen the screw and then take it out. 1.

  • Page 9: Maintenance

    MAINTENANCE CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. Replacing carbon brushes 006258 Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to slip in the holders.
  • Page 10 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 11 Memo...
  • Page 12 Makita Corporation Anjo, Aichi, Japan 884617B221...

This manual is also suitable for:

Btd140

Table of Contents