Panasonic KX-TG1401E Operating Instructions Manual page 8

TG1401_1402_1403_1404E(e).book Page 8 Thursday, April 22, 2010 3:17 PM
Preparation
Note:
L It is normal for batteries not to reach full capacity at the initial charge.
Maximum battery performance is reached after a few complete cycles of
charge/discharge (use).
L Actual battery performance depends on a combination of how often the
handset is in use and how often it is not in use (standby).
L Even after the handset is fully charged, the handset can be left on the
base unit or charger without any ill effect on the batteries.
L The battery level may not be displayed correctly after you replace the
batteries. In this case, place the handset on the base unit or charger and
let it charge for at least 7 hours.
8
Controls
Handset
A
B
C
D
E
F
G
H
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
A Receiver
B Display
C {k} (Phonebook)
D {C} (Talk)
N
E Navigator
({e}/{v}/{>}/{<})
? (Volume: {e}/{v})
F {R} (Redial/Pause)
G {R} (Recall/Flash)
H Microphone
I {j/OK} (Menu/OK)
J {ih} (Off/Power)
I
K {C} (Clear)
J
L {INT}
K
KX-TG1401:
To stop paging
KX-TG1402/KX-TG1403/
L
KX-TG1404:
To stop paging/Intercom
M
M Charge contacts
N Ringer