Preparation; Connections - Panasonic KX-TG1401E Operating Instructions Manual

TG1401_1402_1403_1404E(e).book Page 6 Thursday, April 22, 2010 3:17 PM

Preparation

Preparation

Connections

Base unit
The base unit can be mounted on the wall, if required.
L Use only the supplied Panasonic AC adaptor PQLV219E.
L Use only the supplied telephone line cord. Using another telephone line
cord may not allow the unit to work properly.
30 mm
Screws
(Not supplied)
6
Charger
Available for:
KX-TG1402/KX-TG1403/KX-TG1404
The charger can be mounted on the wall, if required.
L Use only the supplied Panasonic AC adaptor PQLV219E.
(220-240 V AC, 50/60 Hz)
Hooks
Note:
(220-240 V AC, 50/60 Hz)
L Never install telephone wiring during a lightning storm.
L Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
To telephone line
During a power failure
The unit will not work during a power failure. We recommend connecting a
corded-type telephone (without AC adaptor) to the same telephone line or
to the same telephone line jack using a T-adaptor. Your Panasonic sales
shop can offer you more information about connection possibilities.
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
25 mm
Hooks
Screws
(Not supplied)