Advertisement
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
1.
POWER port
2.
DVI IN port
3.
RGB IN port
4.
Kensington Lock
See
Connecting the Monitor
Connect the power cord for your monitor to the power port on the back of the
monitor.
Connect the DVI Cable to the DVI IN port on the back of your monitor.
Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
The Kensington lock is a device used to physically fix the system when using
it in a public place. (The locking device has to be purchased separately. )
For using a locking device, contact where you purchase it.
for further information regarding cable connections.
Advertisement
