Infrared Port - Mitsubishi Electric M21i User Manual

Press No ring
key (except Valid.
the alarm. The alarm icons re-
main on the display and the
alarm re-starts ringing 3 minutes
later.
or
Press Valid.
knowledge and end the alarm
ringing.
If the phone is locked or if the PIN
setting is on, the phone returns to
this locked state after the alarm has
rung until you operate it.
If the alarm is acknowledged but not
validated the alarm indicators re-
main on the display for up to 15 min-
utes (it afterwards either goes back
to its 'on' or 'off' previous state).
1. If the Valid softkey is not pressed after the 3rd (and
4
final) alarm ringing the ringing is not repeated but
the phone remains on for 15 minutes. After those
15 minutes the phone reverts to its state before the
alarm sounded.
2. If a call is on at alarm time a 'Call in progress' alert
beep sounds and a visual alert is displayed every 3
minutes. Validate or acknowledge the alarm the
usual way.
To turn the alarm off:
Press . Select Tools .
1
2
Select Alarm clock
3
Select Off .

Infrared port

The infrared port allows to exchange data
between the mobile and other devices
(provided they have an infrared port).
Via the infrared port you can download or
send files such as images for your wallpa-
per (see Pictures, page 30 ), send or receive
name cards,...
To initiate a transfer via the infrared port,
your mobile must be placed facing another
infrared port before port opening.
Both ports can then be opened and syn-
chronised. The requested transfer can be
performed. Objects (e.g name cards) are
62
transferred one by one.
, or any other
) to stop
Ok
or to ac-
.
Opening the infrared port
Opening the infrared port allows
to receive information via this
port.
Once opened, the infrared port
can be used for any kind of trans-
fer (data, fax, file transfer,...). The
infrared port is automatically
closed after a while.
To open the infrared port,
. Select Tools.
Press
1
Select Infrared port
2
Select Open
3 . Confirmation
is displayed.
on top of the standby display
to confirm the port opening.
Closing the infrared port
Closing the infrared port closes
all infrared sessions.
To close the infrared port:
Press . Select Tools.
1
Select Infrared port
2
Select Close
3
Transferring a name card via
the infrared port
You can transfer name via the in-
frared port:
1
Place your mobile opposite the
other device infrared port.
2
Open the other device infrared
port.
3
Select the card you wish to
transfer as explained in section
Viewing and calling phonebook
numbers, page 19.
4
Select Options
Send by IrDA
port is opened and the transfer
is then performed.
You cannot send by IrDA any of the multimedia files
4
(images and melodies) you have downloaded via the
i-mode browser (see i-mode applications, page 38).
.
is displayed
.
.
. Select
. The infrared