Table of Contents
Advertisement
Settings
Tones
Alert mode
You can set the ring, alert and alarm
tones via the Alert modes menu.
4
If you choose the 'Vibrate' or 'Vibrate then ring' option,
the vibrating option replaces all the alert and alarm
tones.
To modify the alert mode:
Press
. Select Settings.
1
2
Select Tones
3
Select Alert modes
Choose one of the available
4
settings (Ring, Silent,
Vibrate, Vibrate & ring or
Vibrate then ring) and press
OK
to validate.
4
1. You can access the Alert modes menu directly from
the standby display by pressing
2. If the Alert mode is set to Silent the icon is dis-
played on the standby screen.
3. When the phone is connected to either the Desk Top
Charger, HF kit, CLA or AC adaptor the vibrator mode
selection is temporarily inhibited and the phone rings
instead of vibrating.
Ring tone selection
You can choose a melody from the
available ring tones stored in the
phone but also from melodies you
have previously composed (see Com-
posed melodies, page 33 ) or down-
loaded
(Downloaded
page 32) and stored.
Press
. Select Settings.
1
2
Select Tones
3
Select Ringtones
Select Incoming call, Incom-
4
ing call L2 (if you have a Line
2 subscription) or Alarm
5
Scroll up
listen to the different ring
tones. Choose one by press-
ing
.
46
.
.
.
melodies,
.
.
.
or down
to
When scrolling up or down wait for
a few seconds to be able to hear the
selected melody
Volume adjustments
The ring tone, key tones, conversa-
tion and alarm tones (alarm clock
and low battery alarm) audio level
can all be individually adjusted via
the Settings menu:
. Select Settings.
Press
1
2
Select Tones
3
Select Volume
4
Select Ring, Ramping, Keys,
Conversation or Alarm
5
Scroll up
or down
adjust the settings.
You can also use the numeric
keys to set the required audio
level: pressing on
volume to 2, pressing on
sets the volume to 6 or
or
7 pressing on
ume to the minimum value (1
for the speech and 0 for all
others).
Press OK
to validate the
6
setting.
7
Select Save
setting.
During a call you can adjust the con-
versation volume level by using the
and
keys.
4
1. If the ring tone volume level is set to 0 the icon
is displayed on the standby screen.
2. Setting the key tones to 0 deactivates the key
tones.
.
.
.
to
sets the
sets the vol-
to store your
Advertisement
Table of Contents
