Table of Contents
Advertisement
4. When sending a phonebook card via the infrared
port, the image is automatically sent unless the file is
protected.
5. The Image failure icon is displayed on incoming or
outgoing calls if a problem related to the image was
detected by the mobile.
SIM names card
• From the standby display:
1
Enter the number. Select
Store
.
2
Select SIM names
3
Fill in the available fields and
select OK
entries.
Select Save
4
card information.
• Via the menu:
. Select Phone Book.
Press
1
2
Select Add name
3
Select SIM names
Enter the name and select
4
OK
.
5
Enter (or confirm) the number
and select OK
6
Select Save
card.
Storing a received number
Numbers stored in the last di-
alled, received, unanswered call
information and SMS message
locations can also be stored into
the phonebook:
1
With a received call, unanswe-
red call or SMS message select
Options
2
For a SMS message scroll down
and select Numbers
number is contained in an
SMS. The message number(s)
is/are displayed. Choose one if
several numbers are available.
2'
For received and unanswered
calls select Store
low the above mentioned pro-
cedure to create a phone
name or a SIM name card.
18
.
to validate your
to store the
.
.
.
to store the
.
if the
then fol-
4
1. While entering a number selecting Clear once dele-
tes the last character. Holding the Clear key deletes
the whole number.
2. The *, +, P (pause), # and _ characters can be
stored as part of numbers.
3. You can use _ (wild card spaces) to store numbers.
When calling a number bearing wild card spaces
select the number from the phonebook, press Ok and
type the number corresponding to the wild card spaces
(=missing figures).
4. If the SIM card or phone memory are full a warning
message is displayed on phonebook selection.
Editing a Phonebook or a
SIM name card
From the standby display:
1
Press
to get to the phone-
book.
2
Scroll down to the card you
want to reach and select
OK
.
3
Scroll down to the field(s) you
want to modify and amend it/
them. Select Valid. or
Save
to store the
changes.
Via the menu:
. Select Phone
Press
1
Book.
2
Select Read
3
Select one of the stored cards.
4
Select Options
5
Select View
6
Scroll down to the field(s) you
want to modify and amend it/
them. Select Save
store the changes.
You can create a voice dialling
pattern on phonebook cards
(see Voice dialling page 22). This
voice dialling pattern can only
be recorded in edition mode.
.
.
.
to
Advertisement
Table of Contents
