Advertisement
C. ATTACHMENT INSTALLATION
1. Remove the plug and belt, as
described in Section A.
NOTE:
THE BELT MUST BE
REMOVED FOR
ATTACHMENT USE.
2. Depress spring clip on hose
(as shown). Insert hose into
cavity.
NOTE:
SPRING CLIP MUST LINE UP
WITH GROOVE AT BOTTOM
OF THE CAVITY OPENING.
Pull gently on hose to insure
a secure fit. When removing
hose, depress spring clip
and pull hose up and out
gently.
Hose attachment is in place
and ready for use. Crevice
tool, extension wand, and
dusting brush slip easily onto
hose end.
Advertisement
