Advertisement
E. SHOULDER STRAP INSTALLATION
(strap included with certain models: Available as optional
accessory to all models
-
part no. 3-503600-601)
1. Place the shortest free-hanging
ends of the shoulder strap, with
snaps, around the handle. The
single clasp should be resting on
top of the handle.
2. Pull the free-hanging end which
has two snaps on it through the
loop above the handle.
3. Press the first connecting snap
over the mating snap below. The
strap should now be firmly
attached around the handle.
(disregard the second snap on
the free-hanging end. This mat-
ing snap is for use with a differ-
ent model).
4. Smooth out the strap so it is not
twisted.
5. Now place the longest free-
hanging end of the shoulder
strap with snaps around the noz-
zle. It should be placed under
and behind the nozzle and con-
tinue up in front of the handle
where the second connecting
snap will press over the mating
snap below. Be sure the clasps
are snapped tightly together. (Dis-
regard the first connecting snap
on the free-hanging end; this
connecting snap is for use with a
different model'.)
6. The strap should be tight around
both the handle and the nozzle.
Advertisement
