Easy Playback; Power On Link - Panasonic Viera TX-L32DT30B Operating Instructions Manual

VIERA Link "
∗ Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.
This TV supports "HDAVI Control 5" function.
Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables
allow you to interface them automatically (p. 96, 97).
These features are limited to models incorporating "HDAVI Control" and "VIERA Link".
•
Some functions are not available depending on the equipment's version of HDAVI Control. Please confirm the connected
equipment's version of HDAVI Control.
•
VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standard known as HDMI
CEC (Consumer Electronics Control), is a unique function that we have developed and added.
As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed.
•
Please refer to individual manuals for other manufacturers' equipment supporting VIERA Link function.
•
For information about applicable Panasonic equipment, consult your local Panasonic dealer
or refer to www.panasonic.co.uk
Preparations
•
Connect the equipment that supports VIERA Link.
•
VIERA Link connection (p. 96, 97)
Use a fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilised.
Recommended Panasonic HDMI cables' part numbers:
• RP-CDHS15 (1.5 m)
•
Use a fully wired SCART cable.
•
Set up the connected equipment. Read the manual of the equipment.
•
For optimal recording, the settings of the recorder may need to be changed. For details, read the manual of the recorder.
•
Download Analogue channel setting
•
Set [VIERA Link] [On] in the Setup Menu
•
Set up the TV
After connection, turn the equipment on and then switch the TV on.
Select the input mode to HDMI1, HDMI2, HDMI3 or HDMI4 (p. 29), and make sure that an image is displayed correctly.
This setup should be done each time when the following conditions occur:
• for the first time
• when adding or reconnecting equipment
• when changing setup
Features available
Analogue channel download
Analogue channel settings can be downloaded to a recorder with an analogue tuner (where Analogue is still broadcast). Digital
channel settings are not downloaded.
•
To download the Analogue channel settings

Easy playback

Automatic Input switching - When the connected equipment is operated (during playback or menu operations, etc.), the input
mode is switched automatically. When playback is stopped or menus are exited, the input mode returns to the original setting.

Power on link

When the connected equipment starts playback or the direct navigator / function menu for the equipment is activated, the TV
is automatically turned on and the input mode is switched automatically so that you can view the content. (Only when the TV
is in Standby mode.)
Power off link
When the TV is set to Standby mode, the connected equipment is also automatically set to Standby.
•
This function will work even if the TV enters Standby mode automatically by auto power standby function.
Control™" ∗
• RP-CDHS30 (3.0 m)
"Analogue channel download" (see below)
[VIERA Link] (p. 41)
[Q-Link Download] (p. 41) or [Auto Setup] in Analogue mode (p. 49) or
"Auto Setup" - when first using the TV (p. 12)
• RP-CDHS50 (5.0 m)
99