Panasonic Viera TX-L32DT30B Operating Instructions Manual page 119

Message
Reset to Factory Shipping
Condition Completed.
Please switch off TV.
Sending Preset Data
Software successfully updated.
Press EXIT to continue.
Software update failed. Please
try again later.
Press EXIT to continue.
The device is not directly
connected to the TV.
The device may not work correctly.
This timer will not follow the TV
Guide information.
Press OK to continue, RETURN to
restore original timer.
Timer already expired !
Timer incorrect !
Timer overlap.
Press OK to keep, RETURN to
edit.
Tuner Locked
Press EXIT to unlock and stop
recording
Unable to download, please
check equipment
3D image not available.
■
Media Player
Message
Cannot read file
No Device Inserted
No valid file to play
This operation is not possible
■
Network
Message
An internal error occurred.
Cannot read file
Communication with the server
failed.
Connection to the server failed.
Server not found
The software update is not
completed.
Ethernet cable not connected
•
[Auto Setup] will automatically start when Mains power On / Off switch is next
turned On. (p. 12)
•
Q-Link or VIERA Link channel download is in progress.
•
The software updating is finished.
•
Perform [System Update Search Now] in System Update (p. 65).
If this is still unsuccessful, there may not be any new software available.
•
Please do not connect the device via a USB HUB.
•
If you edit the start time or end time of Guide link programming by more than
10 minutes, it will no longer be performed as Guide link programming. The
programming will be performed according to the time setting.
•
The starting time in Timer Programming has already passed. Set the timer correctly
(p. 59).
•
Set the start and end times in Timer Programming correctly (p. 59).
•
Timer programming events are overlapped. Press the OK button to keep
the overlapped setting. [Ext Rec.] and [USB HDD Rec.] are given priority over
[Reminder]. When two or more [Ext Rec.] / [USB HDD Rec.] overlap, the first
timer programming event starts and finishes as programmed. The next timer
programming event can then start.
•
If you want to unlock the tuner, cancel Direct TV Recording (p. 98, 100), the
recording of Timer Programming (p. 59) or One Touch Recording (p. 71).
•
The tape or disc is active. Stop the equipment and try again.
•
You may use a function not available for 3D effect. Exit the function to view the 3D
images.
•
The file is broken or unreadable.
Check applicable data format. (p. 108, 109)
•
Confirm the SD Card or USB device is inserted correctly.
•
The card has no data.
•
The selected operation is not available.
•
Check the settings. (p. 87 - 91)
•
The file is broken or unreadable.
Check applicable data format. (p. 108, 109)
•
This might be a problem of the media server.
Read the manual of the server software.
•
Check the connections and settings. (p. 86 - 91)
•
There are no available media server on your home network.
Check the connections and settings. (p. 86 - 91)
•
Network download failed.
Check the connections and settings. (p. 86 - 91)
•
Check the connection of the LAN cable. If you use a hub, also check the light on the hub is lit.
•
The LAN cable might be defective.
Meaning / Action
Meaning / Action
Meaning / Action
119