Attaching / removing the pedestal
To help avoid risk of damage or injury by the TV tipping or falling, please follow the warnings and cautions below:
Warning
•
Do not disassemble or modify the pedestal.
Caution
•
Do not use any pedestal other than the one provided with this TV.
•
Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer
immediately.
•
During setup, make sure that all screws are securely tightened.
•
Ensure that the TV does not suffer any impact during installation of the pedestal.
•
Ensure that children do not climb onto the pedestal.
•
Install or remove the TV from the pedestal with at least two people.
A
Assembly screw (4)
•
XSS5+15FNK
M5 × 15
B
Assembly screw (4)
•
XYN4+F30FJK
M4 × 30
1
Assembling the pedestal
Use the assembly screws
base
securely.
D
•
Make sure that the screws are securely tightened.
•
Forcing the assembly screws the wrong way will strip the
threads.
C
D
Front
3
Securing the TV
Use the assembly screws
•
Tighten the four assembly screws loosely at first, then tighten them
firmly to fix securely.
•
Carry out the work on a horizontal and level surface.
B
Foam mat or thick soft cloth
C Bracket
•
TBL5ZA3119
to fasten the bracket
A
C
A
Hold the bracket not to
fall over
to fasten securely.
B
B
D Base
•
TBL5ZX0105 (TX-L32DT30B)
•
TBL5ZX0107 (TX-L37DT30B)
2
Attach the cover
to the
Place the cover
•
Insert the protrusions of the cover into the holes of the
bracket.
•
The cover has a nick on the back.
Attach the cover so that the nick fits underneath the
bracket.
D
Front
Back of the TV
E
C
E Cover
•
TBL5ZB3087-1
so that it covers up the screws
E
E
Nick on the back of the
cover
Adjusting the panel to your desired
angle
•
Do not place any objects within the full
rotation range.
(View from the top)
.
A
15°
15°
7