Wireless Connection Settings - Panasonic Viera TX-L32DT30B Operating Instructions Manual

4
Select [Connection Test] and access to test
Network Setup
Connection Test Access
Network Type Wired
Access Point Settings ---
IP/DNS Settings
Network Link Settings
Software Update
MAC Address ab-cd-ef-gh-ij-kl
Connection Test
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA Connect.

Wireless connection settings

This setting is for the network connection by using the Wireless LAN Adaptor. (Wireless connection)
•
Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the manual of
the access point.
1
Select [Network Type] and set to [Wireless]
Network Setup
Connection Test
Network Type Wireless
Access Point Settings No settings
IP/DNS Settings
Network Link Settings
Software Update
MAC Address ab-cd-ef-gh-ij-kl
2
Select [Access Point Settings]
Network Setup
Connection Test
Network Type Wireless
Access Point Settings No settings
IP/DNS Settings
Network Link Settings
Software Update
MAC Address ab-cd-ef-gh-ij-kl
3
Select the connection type and set
Connection Type
Please select network connection type.
WPS(Push button)
WPS(PIN)
Search for access point
Manual
4
Confirm the connection status of [Access Point Settings]
Network Setup
Connection Test
Network Type Wireless
Access Point Settings Connected
IP/DNS Settings
Network Link Settings
Software Update
MAC Address ab-cd-ef-gh-ij-kl
select
access
•
Performs automatic testing of the network connection for the TV. (It takes a
while to test.)
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections, and then perform this function again.
select
access / store
select
access
select
access
•
For details of each connection type
•
After settings, return to [Network Setup] screen
- - - : [Wired] is selected in [Network Type].
[No adaptor] : Wireless LAN Adaptor is not connected.
[No settings] : Setting for connecting to the access point has not been set.
[Connecting...] : Connecting to the access point in progress.
[Connected] : Wireless connection to the access point succeeded
•
To display the current access point settings, press the OK
button.
To change the settings, select [No] on this screen.
•
Some access points do not allow access to the internet.
Perform [Connection Test] (p. 90) to check if internet
connection is available.
[USB overcurrent] : Overcurrent error
(p. 90, 91)
(p. 117)
89