Priority Call - Panasonic KX-TU301SP Operating Instructions Manual

Easy use mobile phone
Table of Contents

Advertisement

TU301SPME(en-en)_0901_ver012
Settings and Tools
3
MbN: "Call Barring" ®
4
MbN: "Barring Password" ®
5
Enter the current 4-digit password. ®
6
Enter the new 4-digit password. ®
7
Re-enter the new 4-digit password for
verifying. ®

Priority call

Priority call is a function that allows you to ask
a registered person for assistance by sending
a text message (SMS) and making a call,
using M
N (back of the phone).
The phone will beep and send an SMS
message, and then call the number you stored
in the call number list. Before using this
feature, you need to store the phone number
(5 numbers max.) to the call number list in the
desired order of priority.
Note:
R M
N can be activated while the key lock is
on (page 13).
Priority call procedure
1
Press and hold M
for about 3 seconds, or press it 3 times
within 3 seconds when in standby mode.
2
The phone sends an SMS message.
R If the buzzer function is on, the phone
beeps until the SMS message is sent
(page 29).
R If the SMS message is not stored
(page 29), the phone skips this step.
3
The phone dials the 1st phone number in
the call number list. Speakerphone is on.
R To switch to the receiver, press M
4
n If the call is answered, the priority call
procedure is stopped and you can start
the conversation.
R The priority call procedure is stopped
even if the call accesses the voicemail
centre.
OR
28
Note:
R If you want to stop the priority call
Adding a priority call number
You can store the phone number to the priority
call number list (5 numbers max.).
n By entering phone numbers:
N (back of the phone)
n From the contacts list:
N.
n If the other party is busy, rejects the
call, or does not answer within 60
seconds, the phone automatically dials
the next number. The phone repeats the
sequence of sending SMS message and
dialling the numbers in the call number
list, a maximum of 2 times. If nobody
answers the priority call, the phone
disconnects the call.
procedure, press M
N during dialling.
1
®
®
2
MbN: "Call" ®
3
MbN: "Priority Call" ®
4
MbN: "Call Number" ®
5
MbN: Select the desired position in the
call number list. ®
6
MbN: "(No name)" ®
7
Enter the party's name (16 characters
max.; page 18). ®
R To change the input mode:
® MbN: "Input mode" ®
® MbN: Select the desired
input mode (page 18). ®
8
MbN: "(Number Empty)" ®
9
Enter the party's phone number (40
digits max.). ®
1
®
®
2
MbN: "Call" ®
3
MbN: "Priority Call" ®
4
MbN: "Call Number" ®
5
MbN: Select the desired position in the
call number list. ®
6
MbN: "Add List" ®
®

Advertisement

Table of Contents
loading

Table of Contents