Table of Contents
Advertisement
● GPRS transfer pref.:
Select Call prefer or Data prefer).
Security settings
This function provides you with related settings about safety use.
● SIM security:
● PIN lock:
To activate PIN lock, you need to input the correct PIN code. If you set PIN lock to on, you
need to input the PIN each time you power on the mobile phone. In the case you input a
wrong PIN for three consecutive times; you need to input the PIN Unblocking Key (PUK).
The PUK is used to unlock and change the locked PIN. To obtain the PUK, contact the
network operator.
● Change PIN:
To change PIN code of SIM card.
● Change PIN2:
To change PIN2 code of SIM card.
● Phone security
● Phone lock:
The function enables you to lock/unlock the phone. Entering password to switch on the
phone. Password is required when the phone is locked. The initial password is 1122.
● Change password:
To change phone password.
● Privacy protection
In this menu, you can set password-protected on the need of menu. For the menu
open the private protection, need to input a phone password when you entered.
Enter the other module which has opened the function, do not input the password
again until return to idle to give up operation of authority.
Restore Settings:
Use this function to restore factory settings. The preset password is 1122.
6.9 Priority call
This feature allows you to ask a registered person for assistance by calling them and sending an
SMS message, using
number you stored in the call number list. Then send an SMS message*
*
This action differs depending on the setting of "By call or SMS setting"
Note:
● Store the phone numbers (5 numbers max.) in the list in the desired order of priority.
● button can be activated even when the phone is closed.
Priority call procedure
1
Press and hold button for 3 seconds when in standby mode
2
The phone dials the 1st person in the list. Handsfree is turned on.
Call is answered
– Other party is busy
– Rejects the call
– Does not answer within
20 seconds
button (on the back of the phone). The phone will beep and call the
● You can begin your conversation.
● You can skip to the next person by pressing "Abort" while
calling. Press End key to end the priority call.
● The phone automatically dials the next person.
● The phone continues to send SMS messages and dial
numbers in the list in sequence, up to a maximum of
2 times. Then the phone sends your stored SMS message.
24
Advertisement
Table of Contents
