Wireless Remote Control - Mitsubishi LDT551V User Manual

Parts Name and Functions (continued)
1 POWER button
Switches the power on/off.
* When the Power indicator is not glowing, no controls will
work.
2 INPUT buttons
Select the input signal from [RGB1] (HDMI), [RGB2] (DVI-D),
[RGB3] (D-SUB), [RGB4] (BNC), [OPTION]*, [RGB6] (DISPLAY
PORT), [DVD/HD] (YPbPr), [VIDEO<S>], and [VIDEO].
* OPTION can be used when an optional module is mounted
on the option slot.
3 PICTURE MODE button
Selects the picture mode from [HIGHBRIGHT], [STANDARD],
[sRGB], and [CINEMA]. See page 32.
HIGHBRIGHT: The brightness is maximized.
STANDARD: Factory default setting.
sRGB: Suitable for color matching with sRGB-
compliant devices.
CINEMA: Suitable for viewing movies.
4 DISPLAY button
Displays the screen information. See page 52. When the remote
control mode is LOCK, you can set it back to NORMAL by
holding down the DISPLAY button for at least 5 seconds (see
page 50).
5 SET button
Accepts the settings made in the OSD menu.
6 MINUS button (-)
Acts as (-) button to decrease the adjustment in the OSD menu.
When the PIP mode is active, this button moves the sub picture
to the left.
7 AUTO SETUP button
Displays the auto setup menu. See pages 32 and 47.

Wireless Remote Control

8 AUDIO INPUT buttons
Select the audio input from [AUDIO1], [AUDIO2], [AUDIO3],
[HDMI], and [OPTION]*. However, note that [VIDEO<S>] and
[VIDEO] use common settings. You can select [HDMI] only
when the video input source is [RGB1].
* OPTION can be used when an optional module is mounted
on the option slot.
9 PIP (Picture-in-Picture) buttons
ON/OFF button:
INPUT button:
CHANGE button: Changes the main picture with the sub
[Description]
PIP: Picture-in-Picture
The sub picture is displayed within the main picture.
POP: Picture-out-Picture
The sub picture is displayed to the bottom right of the main
picture.
SIDE BY SIDE
The main picture and the sub picture are displayed side by
side.
NOTE:
When the screen size is [CUSTOM] or [REAL], the PIP and POP
modes don't work.
STILL button
10
ON/OFF button:
CAPTURE button: Captures the new picture.
SIZE button
11
Selects the picture size from [FULL], [NORMAL], [CUSTOM],
[DYNAMIC], and [REAL]. See page 52.
MENU button
12
Switches the OSD menu mode on/off.
UP button (
13
Acts as
an adjustment item in the OSD menu. When the PIP mode is
active, this button moves the sub picture up.
14 PLUS button (+)
Acts as (+) button to increase the adjustment in the OSD menu.
When the PIP mode is active, this button moves the sub picture
to the right.
EXIT button
15
Displays the previous OSD menu.
DOWN button (
16
Acts as
an adjustment item in the OSD menu. When the PIP mode is
active, this button moves the sub picture down.
MUTE button
17
Switches the mute function on/off.
VOLUME buttons (VOL)
18
Pressing the plus (+) side increases the audio output level.
Pressing the minus (-) side decreases the audio output level.
English-10
Switches the PIP or POP mode on/off.
Selects video to be displayed in the sub
picture.
picture.
Switches the still picture mode on/off.
)
button to move the highlighted area up to select
)
button to move the highlighted area down to select