Table of Contents
Advertisement
10. Multi-unit Operation
Press {INT}, {C} or {s} to answer the
page.
3. Base unit:
To complete the call transfer, press {DIGITAL
SP-PHONE} or replace the handset.
To establish a conference call, press {3}.
To transfer a call without speaking to the
cordless handset 1 user
After step 1, press {DIGITAL SP-PHONE} or
replace the handset.
If the transferred call is not answered within 60
seconds, the base unit will ring again. Press
{LOCATOR/INTERCOM} to return to the
outside call.
10.4.3 Between cordless
handsets
Example: When cordless handset 1 transfers
a call to cordless handset 2
1. Cordless handset 1:
During an outside call, press {INT} and {2}
(desired cordless handset number).
L The outside call will be put on hold.
L If there is no answer, press {INT} or {C}
to return to the outside call.
2. Cordless handset 2:
Press {INT}, {C} or {s} to answer.
L Cordless handset 2 can talk with cordless
handset 1.
3. Cordless handset 1:
To complete the call transfer, press {ih}.
To establish a conference call, press {3}.
To transfer a call without speaking to the
cordless handset 2 user
After step 1, press {ih} on the cordless
handset 1.
If the transferred call is not answered within 60
seconds, the cordless handset 1 will ring again.
Press {INT} to return to the outside call.
82
10.5 Copying cordless
handset phonebook items
Phonebook items (page 31) can be copied from
the cordless handset to the phonebook of
another cordless handset.
L Keep the front cover page open for button
locations.
Example: When cordless handset 1 is
sending phonebook items to cordless
handset 2.
1. Establish an intercom call (page 80).
2. Cordless handset 2:
Press * (centre of joystick), select "Recv
Phonebook", then press ,.
3. Cordless handset 1:
Press *, select "Send Phonebook",
then press ,.
L If you copy all items, skip to step 5.
4. Cordless handset 1:
Push the joystick up or down repeatedly to
select the desired item.
5. Press ,.
6. Cordless handset 1:
Select "Copy One Item" or "Copy All
Items", then press ,.
L When copying is completed, a beep
sounds and "Copy Complete" is
displayed. After a few seconds, the
cordless handset will return to the
intercom call.
Note:
L If cordless handset 2 (the receiver) did not
prepare for copying, "Copy Failure" will
be displayed on cordless handset 1 (the
sender).
L If phonebook memory is full on cordless
handset 2 (the receiver), "Copy
Incomplete" will be displayed on handset 1
(the sender).
Advertisement
Table of Contents
