Table of Contents
Advertisement
To set the base unit ringer type from one of 6
types for outside calls. You can select "RINGER
1" (default), "RINGER 2", "RINGER 3",
"RINGER 4", "RINGER 5" or "RINGER 6".
Note:
L To set the cordless handset ringer type, see
page 72.
9. Programmable Features
9.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON
[±]
"ON" (default): The unit will print a journal report
automatically after every 30 new fax
transmissions and receptions (page 41).
"OFF": The unit will not print a journal report, but
will keep a record of the last 30 fax transmissions
and receptions.
Code #23: Sending documents overseas
OVERSEAS MODE
=ERROR
[±]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
"ERROR" (default): When the previous fax
transmission fails and you wish to re-send the
document.
"NEXT FAX": This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
"OFF": Deactivates this feature.
Note:
L This feature is not available for broadcast
transmission.
L Calling charges may be higher than usual.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF
[±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 40).
3. Press {MENU}.
4. Press {#} then {2}{5}.
5. Press {A} or {B} repeatedly to select "ON".
6. Press {SET}.
7. Enter the fax number.
65
Advertisement
Table of Contents
