Recording Check - Panasonic NV-GS80EP Operating Instructions Manual

LSQT1130_ENG.book 21 ページ ２００６年１２月１６日 土曜日 午後８時４５分
ª On-screen display in the tape
recording mode
1) Recording time elapse
2) Remaining tape indication
ª
Concerning the remaining tape time
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
≥During a 15 seconds or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
Record mode

Recording check

The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set
1)
to a recording pause.
≥Set to Tape Recording Mode.
2)
1
Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon 1 appears.
2
Move the joystick left to select the
recording check icon [
≥The [RECORDING CHECK STARTED]
indication appears on the screen of the movie
camera.
].
1
21
LSQT1130