Panasonic TH-37PR10R Operating Instructions Manual page 23

(For TH-37PR10R, TH-42PR10R)
Advanced settings
Normalise Normal
0
Black extension
0
Input level
Gamma
AGC
Item Effect
Black
extension
Less
Input level
Less
Gamma
Down
AGC
Off
W/B High
R
Less
W/B High
G
Less
W/B High
B
Less
W/B Low R
Less
W/B Low G
Less
W/B Low B
Less
Notes:
• Carry out "W/B" adjustment as follows.
1. Adjust the white balance of the bright sections using the "W/B High R", "W/B High G" and "W/B High B" settings.
2. Adjust the white balance of the dark sections using the "W/B Low R", "W/B Low G" and "W/B Low B" settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Helpful Hint (
On the remote control unit, while the "Advanced settings" menu is displayed, if either the N button is pressed at any time or
the ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.
Advanced settings
1/2
W/B High R
W/B High G
W/B High B
W/B Low R
2.2
W/B Low G
Off
W/B Low B
Adjusts the dark shades of the image in gradation.
More
Adjustment of parts which are extremely bright and hard to see.
(This cannot be adjusted when the input signal is Digital.)
More
S Curve
Up
Increases the brightness of dark signal automatically.
On
Adjusts the white balance for light red areas.
More
Adjusts the white balance for light green areas.
More
Adjusts the white balance for light blue areas.
More
Adjusts the white balance for dark red areas.
More
Adjusts the white balance for dark green areas.
More
Adjusts the white balance for dark blue areas.
More
/ Normalisation)
Normalise
2/2
0
0
0
0
0
0
Details
2.0 2.2 2.5
Picture Adjustments
23