Power On / Off - Panasonic TH-37PR10R Operating Instructions Manual

Power On / Off

Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the
Plasma Display with the clamper.
(see page 8)
Connecting the plug to the Wall Outlet.
Notes:
• Main plug types vary between countries. The power plug shown
at right may, therefore, not be the type fi tted to your set.
• When disconnecting the AC cord, be absolutely sure to
disconnect the AC cord plug at the socket outlet fi rst.
Press the Power switch on the Plasma Display to turn the set
on: Power-On.
Power Indicator: Green
Example: The screen below is displayed for a while after the
Plasma Display is turned on (setting condition is an
example).
Press the
Power Indicator: Red (standby)
Press the
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the
unit, when the Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
button on the remote control to turn the Plasma Display off.
button on the remote control to turn the Plasma Display on.
Remote Control Sensor
Power Indicator
switch on the
11