Other Play Methods; Program Play; Repeat Play/Random Play; Changing The Sound Quality - Panasonic SL-CT790 Operating Instructions Manual

Other Play Methods

The letters such as A in the illustrations refer to the descriptions in the "Location of Controls" section (See page 3.).
Skip play
The disc plays from the selected track through to the
last track, then play stops automatically.
Preparation:
Put unit in stop mode.
1
Select the desired track.
Main unit Main unit
G
Remote control
Remote control
A
EQ MODE MEMORY
(Beep Beep Beep)
2
Main unit
Main unit
E
Remote control
Remote control
C
EQ MODE MEMORY
6

Program play

Up to 24 tracks can be entered in the program.
Preparation:
1
Select the desired track.
Main unit
Main unit
G
Remote control Remote control
A
(Beep Beep)
2
Register in sequence.
(The indication "M" and the programmed se-
quence appear on the display.)
Remote control only
Remote control only
I
3
Repeat steps 1 and 2 to program all
the desired tracks.
(Beep)
4
Main unit
Main unit
E
Remote control
Remote control
C
∫ To program the same track in the se-
quence more than once
After step 2, press [MEMORY] (remote control) the de-
sired number of times.
∫ If "'" is displayed
No more tracks may be programmed.
∫ To confirm the contents of the program
Press [MEMORY] (remote control) while the disc is
playing. (The numbers of the programmed tracks ap-
pear on the display in sequence. The display stays lit as
long as the tracks continue to be displayed.)
∫ To delete the entire program
Press [∫] (main unit) or [1/∫] (remote control).
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
Put unit in stop mode.
EQ MODE MEMORY
(Beep Beep Beep) (Beep Beep)
EQ MODE MEMORY
(Beep)
EQ MODE MEMORY
(Beep)

Repeat play/Random play

Remote control only Remote control only
Press during play or stop mode.
H
EQ MODE MEMORY
(Beep)
The setting switches as shown below each time you
press the button.
1-track repeat (1 `)( ----------------]
One track is repeated.
v
All-track repeat (`)
All the tracks on the disc are repeated. |
v
Random (RANDOM)
The tracks play once each in random
order and then play stops.
v
Random repeat (` RANDOM) |
The tracks play repeatedly in random
order.
v
--------------}
Cancel (no indicator is shown)
When pressed during program play
The setting switches as shown below each time you
press the button.
1-track repeat (1 ` M)(------------]
One track is repeated.
v
Memory repeat ( ` M)
The programmed tracks are repeated. |
v
-------------------------------------------}
M
Cancel ( )
Note!
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
≥The resume function does not work when random or
random repeat are on.
≥When [MODE] is pressed, the sound will be interrupt-
ed for an instant. This is normal and not indicative of a
malfunction.
≥The mode is canceled when you disconnect the power source.

Changing the sound quality

Remote control only
Remote control only
Press during play or stop mode.
G
EQ MODE MEMORY
(Beep)
The setting switches as shown below each time you
press the button.
S-XBS>TRAIN>LIVE>Cancel (no indicator is shown)
^ -------------------------------------------------------------}
S-XBS:
Select this setting to boost the low frequency range re-
sponse.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your stereo earphones while riding on
the train, or to reduce fatigue when listening for a long
period of time.
LIVE:
Select this setting for a live concert effect.
Note!
≥This function does not work if you have connected a
cable to the [OPT OUT/OUT] jack.
≥1. The setting is canceled when you connect a cable
to the terminal, but is restored when you disconnect
the cable.
≥2. The setting cannot be changed while a cable is con-
nected. An error tone (beep-beep-beep-beep)
sounds when you press [EQ].
≥The setting returns to S-XBS when you disconnect the
power source.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|