Operation; Anti-Skip System; Using The Remote Control - Panasonic SL-CT790 Operating Instructions Manual

Operation

Press during play.
To pause play
Press again to restart play.
Press during play.
To stop play
Resume function
Stop mode
Play starts from the beginning of
the current track the next time you
press [1/ ; ].
Press during stop mode.
To turn off the
Off mode
unit
The resume function remains active.
Press during play.
(Press [ : ] twice to skip to the
Skipping
beginning of the previous track.)
tracks
Backward
Searching
through tracks
Press and hold during play.

Using the remote control

∫ Operation confirmation tones
This tone sounds when a button on the remote control
is pressed. Refer to the parentheses in the illustrations
for the different types of confirmation tones.
∫ Turning the operation tone on and off
While stopped or during play
Press and hold [EQ] for 5 seconds until the display ap-
pears.
The tone sounds when the setting is changed.
EQ MODE MEMORY
To turn the tone on
To turn the tone off

Anti-Skip System

This system deals with skipping in a variety
of ways:
≥The thinner and lighter construction makes the unit
less susceptible to vibration.
≥An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
≥A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
≥The 48-seconds anti-skip memory fills in interruptions
caused by bumps and vibrations.
5
Unit
You cannot pause with the remote control.
Press during play.
Resume function
Play starts from the beginning of the current track
the next time you press [1/∫].
Press and hold
during play or
stop mode.
(Beep...Bee...p)
The resume function remains active.
Press during play.
(Press [ : ] twice to skip to the beginning of the
previous track.)
Forward
Press and hold during play.
∫ The display light
The light in the remote control's display comes on for
about 5 seconds when you press a button, unless the
hold function is on.
To check the current display
Change the position of the hold switch. The light comes
on for about 5 seconds.
S-XBS
S-XBS
The capacity of the anti-skip memory de-
pends on how you are using the unit.
≥When listening through stereo earphones
– up to a maximum of 48 seconds.
(It cannot be turned off.)
≥When connected to an audio system with a
stereo connection cable (analogue) through
[OPT OUT/OUT]
– up to 10 seconds.
≥When an optical cable (digital) is connected to
[OPT OUT/OUT]
– anti-skip memory is off.
[OPT OUT/OUT]
By automatically changing the function, the unit allows
you to listen to high-quality, uncompressed digital audio
when connected to an audio system.
Remote control
(Beep...Beep)
EQ MODE MEMORY
EQ MODE MEMORY
EQ MODE MEMORY
Backward
(Beep Beep Beep) (Beep Beep)
Back panel of the unit
9
HOL D
Display/reference
Total number of tracks
No indicator is shown
≥During program play (page 6), these buttons are
used to skip forward or backward through the pro-
grammed sequence of tracks.
≥You cannot skip to tracks that have been played in
random or random repeat play (page 6).
≥During program play, random play, random repeat
play or 1-track repeat play (page 6), search opera-
tion is limited to the current track only.
Forward
When using batteries
This unit includes a mechanism that extends the
life of the batteries by varying the rotation rate of
the motor. Motor noise may increase when the rate
changes.
If the noise bothers you
Use the AC adaptor to power the unit. The rotation
rate does not change while you are using the AC
adaptor.
When bumps continue repeatedly
The elapsed playing time disappears and sound is inter-
rupted.
Note!
≥While the system is on, the disc rotates at a higher
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.
≥The 48-second anti-skip memory compresses digital
signals.
S-XBS
Total playing time
S-XBS
S-XBS
RQT6158