Table of Contents
Advertisement
a
b
c
d
e
(special accessory for recirculation
mode)
f
(only for recirculation mode)
g
h
i
This control switches the lighting on
and off, and is also a dimmer switch.
j
k
l
The fan can be set to continue running
and switch off automatically after either
5 or 15 minutes.
m
The indicator lamp for the grease filter
touch control lights up when the grease
filters need to be cleaned.
The touch control is used:
– to reset the operating hours counter
after cleaning the grease filters (see
"Cleaning and care").
– to show how long the filters have
been in use (see "Operation: Filter
operating hours counter").
– to alter the number of hours counted
by the filter operating hours counter
(see "Operation - Setting and altering
the grease filter operating hours
counter").
n
The indicator lamp for the charcoal filter
touch control lights up when the
charcoal filter used in recirculation
mode needs to be replaced.
The touch control is used:
– to reset the operating hours counter
after replacing the charcoal filter (see
"Cleaning and Care").
– to show how long the filter has been
in use (see "Operation: Filter
operating hours counter").
– to alter the number of hours counted
by the filter operating hours counter
(see "Operation - Setting and altering
the charcoal filter operating hours
counter").
11
Advertisement
Table of Contents
