Panasonic Viera TX-L32S20B Operating Instructions Manual page 75

Message
Please check settings and connections
on HDMI devices.
Please wait.
Recording this channel now
Reset to Factory Shipping Condition
Completed. Please switch off TV.
Sending Preset Data
Software successfully updated.
Press EXIT to continue.
Software update failed. Please try again later.
Press EXIT to continue.
This timer will not follow the TV Guide
information.
Press OK to continue, RETURN to restore
original timer.
Timer already expired !
Timer Event Due to Start
: has been
programmed for External recording
at :
Timer incorrect !
Timer overlap.
Press OK to keep, RETURN to edit.
Tuner Locked
Press EXIT to unlock.
Any timer programme in progress will
also be deleted.
Unable to download, please check equipment
Media Player
Cannot read file
No SD card inserted
No valid file to play
Please confirm the SD card is OK
This operation is not possible
Network
Ethernet cable not connected
Meaning / Action
Communication error in VIERA Link function (p. 61).
A function is in progress.
The recorder is recording the programme from its own tuner. You can turn
the TV off and leave the equipment recording in the normal way.
"Auto Setup" will automatically start when Mains power On / Off switch is
next turned On. (p. 12)
Q-Link or VIERA Link channel download is in progress.
The software updating is finished.
Perform "System Update Search Now" in System Update (p. 51).
If this is still unsuccessful, there may not be any new software available.
If you edit the start time or end time of Guide link programming more than
10 minutes, it will no longer be performed as Guide link programming.
The programming will be performed according to the time setting.
The starting time in Timer Programming has already passed. Set the
timer correctly (p. 43).
This message will appear 2 mins. before timer programming event for
external recording due to start.
Set the start and end times in Timer Programming correctly (p. 43).
Timer programming events are overlapped. Press the OK button to keep
the overlapped setting. "Ext Rec." is given priority over "Reminder". When
two or more "Ext Rec." overlap, the first timer programming event starts
and finishes as programmed. The next timer programming event can
then start.
If you want to unlock the tuner, cancel Direct TV Recording (p. 60 and
p. 62) or Ext Rec. of Timer Programming (p. 43).
The tape or disc is active. Stop the equipment and try again.
The file is damaged or unreadable.
The TV does not support the format.
(For the applicable formats and data
Confirm the SD Card is inserted correctly.
The card has no data.
The inserted SD Card has a problem.
The selected operation is not available.
Check the connection of the LAN cable. If you use a hub, also check the
light on the hub is lit.
The LAN cable might be defective.
p. 71)
75