Panasonic Viera TX-L32S20B Operating Instructions Manual page 65

Features available (Using VIERA Link Menu)
Speaker control
You can control the home theatre speakers with this TV remote control (point the remote control at
the TV's signal receiver).
If you cannot control the home theatre speakers with this remote control, check the settings and the
equipment
"Summary of Q-Link and VIERA Link features" (p. 58 and p. 59), "Preparations" (p. 61)
Access and control the speaker volume
INPUT
TV AV
ASPECT MENU N DIRECT TV REC
EXIT
OPTION RETURN
TEXT STTL INDEX HOLD
PROGRAMME
TV
Note
These functions may not work properly depending on the connected equipment.
Image or sound may not be available for the first few seconds when Input mode is switched.
Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier.
Read the manual of the equipment.
"HDAVI Control 5" is the newest standard (current as of December, 2009) for HDAVI Control compatible
equipment. This standard is compatible with conventional HDAVI equipment.
To confirm this TV's version of HDAVI Control
Speaker Selection
Display "VIERA Link Menu"
1
Select "Speaker Selection"
2
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Set to "Home Cinema" or "TV"
3
Home Cinema
The Player theatre, Blu-ray Disc theatre or Amplifier will be
automatically turned on if it is in Standby mode and the sound
will be output from theatre speakers connected to the equipment.
Volume up / down
Mute
The sound of the TV speakers is muted.
When the equipment is turned off, the TV speakers will be activated.
TV
TV speakers are active.
Note
If you wish to enjoy multi-channel sound (e.g. Dolby Digital 5.1ch) via an
Amplifier, connect the Amplifier to the TV with an HDMI cable and an Optical
digital audio cable (p. 59), and then select "Home Cinema". If your Amplifier has
"HDAVI Control 5" function, you only need to connect with an HDMI cable. In this
case, connect your Amplifier to the TV's HDMI2 terminal.
To enjoy the sound from the DIGA Recorder in multi-channel sound, connect an
HDMI cable from the DIGA Recorder to the Amplifier (p. 59).
"System Information" (p. 31)
Start
Start
Recorder
Home Cinema
select
set
65