Panasonic Viera TX-L32S20B Operating Instructions Manual page 60

Link Functions
Preparations
Connect the DVD Recorder / VCR with the following logos:
"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic" or "SMARTLINK"
Q-Link connection
Use fully wired SCART cable.
Set up the DVD Recorder / VCR. Read the manual of the recorder.
Q-Link terminal setup in the Setup Menu
Download Analogue channel setting
Features available
Analogue channel download
Analogue channel settings can be downloaded to a recorder with an analogue tuner (where Analogue
is still broadcast). Digital channel settings are not downloaded.
To download the Analogue channel settings
Direct TV Recording -
Recording the current programme on a DVD Recorder / VCR immediately.
INPUT
TV
ASPECT MENU N DIRECT TV REC
OPTION
TEXT STTL INDEX HOLD
Power on link and Easy playback
When the DVD Recorder / VCR starts playback or the direct navigator / function menu for the
equipment is activated, the TV is turned on and the input mode is switched automatically so that you
can view the content. (Only when the TV is in Standby mode.)
Power off link
When the TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when
the videocassette or disc is not active.)
This function will work even if the TV enters Standby mode automatically by auto power standby function.
• "DATA LOGIC" (a trademark of Metz Corporation)
• "Easy Link" (a trademark of Philips Corporation)
Note
Some recorders are not compatible. Read the manual of the recorder.
60
p. 58
What you see is What you record
Available conditions:
AV
DIRECT TV REC
Analogue
DVB
EXIT
AV
( watching recorder's tuner)
AV
( watching recorder's external input)
AV
( watching TV's external input)
RETURN
When Direct TV Recording is performed, the recorder is automatically
turned on if it is in Standby mode.
Changing channel or turning off the TV is available while the recorder is
recording from its own tuner.
Changing channel is not available while the recorder is recording from
the TV tuner.
To stop recording
(
Q-Link
VIERA Link
Q-Link
"Q-Link" (p. 30), "AV1 / AV2 out" (p. 30)
"Analogue channel download" (see below)
"Q-Link Download" (p. 30) or "Auto Setup" in Analogue mode
(p. 37) or "Auto Setup" - when first using the TV (p. 12)
Picture source
Unlock the tuner
Any timer programme in progress will also be deleted.
• "Megalogic" (a trademark of Grundig Corporation)
• "SMARTLINK" (a trademark of Sony Corporation)
)
Mode Recording from
TV TV monitor out
AV Recorder's tuner
TV TV monitor out
AV Recorder's tuner
Recorder's
AV
external input
AV TV monitor out
Tuner Locked
Press EXIT to unlock.
Unlock
Continue
EXIT