Storing caller information into one-touch dial
and navigator
Important:
This feature is not available in the following cases:
— The telephone number includes data other than numbers (i.e. : or #).
— The caller information does not include a telephone number.
Press b.
1
Example:
Press + or - until the desired entry is
2
displayed.
Example:
Press p.
3
Example:
4
For stations 1–3:
Press the desired station key.
Example:
Press w.
Press w.
Example:
For stations 4–6:
Press the desired station key.
Press w.
Example:
For stations 7–12:
Press o, then press the desired
station key.
Press w.
Example:
directory!
2SNEW CALLS
PRESS NAVI.[+ -]
134567890
14 Apr. 11:50AM
134567890
PRESS STATION OR
/
134567890
PRESS NAVI.[
I H
]
STATION 1
DIAL MODE
[±]
NAME=
STORE:PRESS SET
<S01>=134567890
NAME=
STORE:PRESS SET
<S04>=134567890
NAME=
STORE:PRESS SET
<S09>=134567890
For navigator directory:
Press ( or ).
NAME=
STORE:PRESS SET
Press w.
NO.=134567890
Example:
Press w.
5
CALLER ID
Station keys
LOWER
Note:
You can confirm the stored entries on the
telephone number list (p. 76).
The unit can only store a name of up to 10
characters long.
To edit a name and number, see page 26.
If you enter a new entry into a station key, the
previous entry will be overwritten.
If you use stations 1–3 as broadcast keys,
you cannot store caller information for
stations 1–3.
Caller ID
REGISTERED
MENU
SET
31