Table of Contents
Advertisement
Adjusting
volume!
Ringer volume
4 levels (high/middle/low/off) are available.
While the unit is idle, press + or -.
To turn the ringer off:
1. Press - repeatedly until the following is
displayed.
Display:
2. Press w.
To turn the ringer back on, press +.
While the ringer volume is set to off:
When a call is received, the unit will not ring and
will display the following.
Ringer pattern
You can select one of three ringer patterns. Change the
setting (feature #17 on page 58). The ringer pattern
you selected will sound when the unit receives a call.
R button!(to use the recall
é is used to access special telephone
services (optional) such as call waiting.
Contact your telephone company business
office for details.
Example: Call waiting
When a call waiting tone is heard during a
conversation:
To hold the existing call and accept the
waiting call
Press é.
Each time you press é, you can switch
between the first and second call.
Incoming calls cannot be dropped by the
person who has received the call.
If your unit is connected to a PBX, pressing é allows you to access some features of your host
PBX such as transferring an extension call.
Volumes / Recall Feature
RINGER OFF= OK?
YES:SET/NO:STOP
RINGER OFF
INCOMING CALL
Monitor volume
8 levels (high to low) are available.
While using the monitor, press + or
-.
Display
feature)!
R
SET
23
Advertisement
Table of Contents
