Table of Contents
Advertisement
3.6 Storing caller
information into the one-
touch dial feature and
navigator directory
L Keep the front cover page open for button
locations.
Important:
L This feature is not available in the
following cases.
– The telephone number includes data
other than numbers (i.e., * or #).
– The caller information does not
include a telephone number.
1
Press {CALLER ID SEARCH}.
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {DIRECTORY PROGRAM}.
4
Select the station key or navigator directory.
For stations 1–3:
1. Press the desired station key.
2. Press {A} or {B} repeatedly to select
"DIAL MODE".
3. Press {SET}.
4. Press {SET}.
For stations 4–11:
1. Press the desired station key.
2. Press {SET}.
For stations 12–22:
1. Press {LOWER}, then press the desired
station key.
2. Press {SET}.
For navigator directory:
1. Press {<} or {>}.
2. Press {SET}.
5
Press {SET}.
Note:
L You can confirm the stored items by printing
the telephone number list (page 77).
L The unit can only store a name of up to 16
characters long.
L To edit a name or number, see page 27.
L If caller information does not include the
caller's name, enter the name manually. See
the instructions on page 26.
L If you assign an item to a station key which
already contains an item, the previous item
will be replaced.
L Station 1 to 3 can be used alternatively as
broadcast keys (page 34).
3. Telephone
31
Advertisement
Table of Contents
