Panasonic WV-PS11B Operating Instructions Manual page 9

1. Connect the coaxial cable between the camera
and CAMERA IN connector of the camera drive
unit. The approximate maximum cable length is as
follows:
Coaxial DC R/1000 ft. of
Cable Type Inner Conductor
RG-59/U Less than 30
RG-6/U Less than 12
The maximum DC resistance of the cable between
the camera and camera drive unit is 20 .
2. Connect the coaxial cable between the video moni-
tor and VIDEO OUT connector of the camera drive
unit. The approximate maximum cable length is as
follows:
Type of
coaxial cable
Recommended (m)
Maximum
cable length (ft)
Maximum
Cable Length
200 m (660 ft.)
500 m (1,650 ft.)
RG-59/U RG-6/U RG-11/U
(3C-2V) (5C-2V) (7C-2V)
250 500 600
825 1,650 1,980
Note:
If the length of the coaxial cable between the
camera drive unit and the video monitor
exceeds the distance shown in the above
table, a cable loss compensator should be
used between the camera drive unit and the
video monitor.
3. After connecting the specified camera to the cam-
era drive unit, connect the audio cable between the
monitor and AUDIO OUT connector of the camera
drive unit.
External VD/SYNC Signal
Signal Level
The VD/SYNC IN connector accepts the VD or VS syn-
chronizing signal for external synchronization.
• VD: 4 V[p-p] / 75 Ω
-7-