Panasonic WV-BS500 Operating Instructions Manual page 35

4. Hook the Fall prevention wire on the camera
mounting angle.
Be sure to match the wire with the fall
prevention wire fixing angle as shown below.
Ring of the
Fall Prevention
Wire
5. Mount the camera on the camera mounting
angle and rotate the camera clockwise.
15
6. Tighten the fixing screw M3 (provided).
Notes :
1. Tighten the camera fixing screw with a
screwdriver.
Fall Prevention
Wire Fixing Angle
- 32 -
2. Follow the instructions given here to
ensure that the camera and camera
mounting angle are installed safely.
3. When removing the camera from the
camera mounting angle, loosen and press
up the camera fixing screw (M3) by using
a screwdriver.
7. Fix the decoration cover to the camera mount-
ing angle.
a. Sideway cable exit
Pass the cables through the cutout made in
the diecast case and decoration cover (refer to
item a, INSTALLATION).
b. Top cable exit
Push the decoration cover against the camera
mounting angle.
When using the optional bracket for mounting, refer
to the Operating Instructions for the WV-Q105, WV-
Q106, WV-Q107 or WV-Q108.