Panasonic WV-BS500 Operating Instructions Manual page 28

(2) Automatic White Balance Control Mode (AWC)
• Display SET UP on the monitor screen.
(Refer to Setup Menu Display for details on displaying
the SET UP menu on the monitor screen.)
• Move the cursor to WHITE BAL and select AWC
PUSH SW by using the joystick.
• Press the CAM (SET) key to start the white balance set-
up. "PUSH SW" starts blinking to indicate that the white
balance is being set.
• "PUSH SW" stops blinking when balance setting is
completed.
• For fine adjustment of the AWC, move the cursor to
select AWC and press the CAM (SET) key to display
the AWC fine adjustment menu on the monitor screen.
You can mask the areas in this menu.
• Move the cursor to MASK SET and press the CAM
(SET) key.
48 mask areas appear on the monitor screen.
Refer to the Light Control Setting section on page 20
for details about masking areas.
• After masking areas, press the MON (ESC) key. The
previous settings for AWC appear on the monitor
screen.
• Move the cursor to "R."
Use the joystick to obtain the optimum amount of red
gain. The "I" cursor moves to the left or right.
• Move the cursor to "B."
Use the joystick to obtain the optimum amount of blue
gain. The "I" cursor moves to the left or right.
• Move the cursor to "RET" by using the joystick and
press the CAM (SET) key to return to SET UP.
9. Wide Dynamic Range Setting (WIDE D-RANGE)
• Display SET UP on the monitor screen.
(Refer to Setup Menu Display for details on displaying the SET UP
menu on the monitor screen.)
• Move the cursor to WIDE D-RANGE and select ON or OFF by using
the joystick.
Bluish
10000K
9000K
8000K
7000K
6000K
5000K
4000K
3000K
2000K
1000K
Reddish
- 25 -
Camera setting menu
** SET UP **
CAMERA ID OFF *
ALC/MANUAL ALC *
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL AWC PUSH SW
WIDE D-RANGE ON
MOTION DET OFF
AF MODE MANUAL *
RET SPECIAL *
AWC fine adjustment menu
** AWC **
R ....I....
B ....I....
MASK SET *
RET
Blue sky
Rainy
AWC
Cloudy
Partly cloudy
ATW
Fine
Fluorescent
lamp
Halogen lamp
Tungsten
lamp
Candle
Camera setting menu
** SET UP **
CAMERA ID OFF *
ALC/MANUAL ALC *
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL AWC *
WIDE D-RANGE ON
MOTION DET OFF
AF MODE MANUAL *
RET SPECIAL *
+
+