Table of Contents
Advertisement
2. Insert the camera fixing
screw into the camera
mounting hole and tighten
the screw firmly.
3. Connect the camera and monitor with the coaxial
cable and turn on the power switch of the monitor.
4. While viewing the monitor picture, loosen the
angular control screw slightly. Adjust the camera's
angle to the desired position, and then tighten the
screw firmly.
Angular Control Screw
-17-
DIMENSIONS OF MOUNTING
BRACKET
90
120 ( 4-3/4)
Cautions on installation
Use wood screws with the camera mounting bracket
that are suitable for Installation into a wood base of
appropriate dimensions and strenght. For installation in
a material other than wood, refer servicing to qualified
service personnel.
Unit: mm (inch)
83.5 (3-5/16)
2- 5 (2- 3/16)
Advertisement
Table of Contents
