Rack Mounting - Panasonic WV-CM1470 Operating Instructions Manual

RACK MOUNTING

To install WV-CM1470 Colour Monitor in an EIA rack, use the rack mounting brackets WV-Q104E (optional) with rack mounting
screws.
1. Turn off the power of the monitor.
2. Remove the four screws from the both side panels of the monitor.
3. Attach the optional rack mounting brackets WV-Q104E to both sides of the monitor and fix them with screws (M4 x 12) which
are accessories of optional mounting brackets WV-Q104E.
M4 12
Cautions:
• Leave one space free both above and below the monitor, or install a cooling fan in the rack.
• If the rack is subject to vibrations, secure the rear of the unit to the rack using additional rack mounting brackets (to be
obtained locally).
Rack Mounting Screws (to be obtained locally)
-7-
EIA Rack
M4 12
(accessary of WV-Q104E)