Automatic Two-Sided Copying From The Document Glass - Sharp MX-M350U Operation Manual

Automatic two-sided copying from the document glass

When the optional duplex module is installed, the following automatic two-sided copying can be performed. The
paper is automatically turned over during copying, allowing two-sided copies to be made with ease.
Original
1 Place the original on the document glass.
(pages 4-3 to 4-6)
Original scale
mark
A5 or
5½ x 8½
B4 or
8½x14
A4 or 8½x11 A3 or 11x17
●Align the corner of the original with the tip of the
arrow mark on the document glass scale.
●Place the original in the appropriate position for its
size as shown above.
2 Touch the [2-SIDED COPY] key.
SPECIAL MODES
2-SIDED COPY
OUTPUT
Copy
Original scale
mark
A4R or 8½x11R
3 Touch the [1-sided to 2-sided copy] key.
Example of a
portrait-oriented
original
When making automatic two-sided copies of a
one-sided A3 (11" x 17") or B4 (8-1/2" x 14") size
portrait original, or when you wish to invert the top
and bottom of the back side of a two-sided original,
touch the [BINDING CHANGE] key.
Touch the [OK] key.
4
0
OK
BINDING
Perform steps 3 to 7 on pages 4-11 and 4-12.
NORMAL COPYING
Example of a
landscape-oriented
original
4-13
4