HANNspree HannsBook SN10E2 Series User Manual page 24

Make sure you have these ready:
1. An USB DVD drive.
2. A Netbook driver CD.
3. Windows 7 Install CD.
Before we continue :
■ Shut down your computer.
■ Connect the USB DVD drive to an USB port of Netbook and connect the power
cord to AC power.
3-1 Insta�� a ne� �indo�s 7 system
1. Power on your Netbook, then
and go to the "Boot" menu, set the "1st Boot Device" to USB DVD drive, press
<F10> to save change and exit BIOS.
Main Advanced Security Boot Exit
Boot Settings
Quick Boot
Quiet Boot
Onboard .AN Boot ROM
Boot Device Priority
1st Boot Device
2nd Boot Device
1st Hard Disk Drive
1st CD/DVD Drive
2. Put the Windows 7 Install CD into the USB DVD drive.
3. The computer will reboot, and it will start loading files for installing Windows 7 system.
4. After that, it will start Windows and come out a "Install Windows" dialog box to set
the "Language to install", "Time and current format" and "Keyboard or input
method". Click "Next" to continue and click "Install now" button to start the setup.
5. When the license terms appears, select to accept and click "Next" to continue.
press <Del> to enter BIOS setup during POST. Select
BIOS SETUP UTI.ITY
Boot
[Enabled]
[Enabled]
[Disabled]
[USB:TEAC DV�W28SS�]
[SATA:PM�WDC WD1���]
[SATA:PM�WDC WD1���]
[USB:TEAC DV�W28SS�]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Specifies the boot
sequence from the
available devices .
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F1� Save and Exit
ESC Exit
20