HANNspree HannsBook SN10E2 Series User Manual page 21

Windows XP Professional Setup
�e�come to Setup.
This portion of the Setup program prepares Microsoft(R)
Windows(R) XP to run on your computer.
● To set up Windows XP now, press ENTER.
● To repair a Windows XP installation using
● To quit Setup without installing Windows XP, press F3.
ENTER=Continue
3. Press <Enter> to continue the installation and press <
Agreement. Windows will display the partition of your system. First of all, you had
better press [D] to delete the partition, then you can press [C] to create partitions as
many as you can, assign them C:, D: or E: logical drive name. In this example, we
will create a 5�GB partition C: and leave the remaining space as a partition D:. The
figure is shown as below:
Windows XP Professional Setup
The following list shows the existing partitions and
unpartitioned space on this computer.
Use the UP ad DOWN ARROW keys to select an item in the list.
● To set up Windows XP on the selected item, press ENTER.
● To create a partition in the unpartitioned space, press C.
● To delete the selected partitions, press D.
114471 MB Disk � at id � on bus � on atapi [MBR]
Unknown Disk
Unknown Disk
ENTER=Install
4. Press <Enter> to install Windows XP. The process will ask you to format hard disk,
copy files...etc, follow the installation steps until the system is installed completely.
Recovery Console, press R.
R=Repair F3=Quit
C:Partition1 [NTFS]
D: Partition2 [Unknown]
Unpartitioned space
<There is no disk in this drive.>
<There is no disk in this drive.>
D=Delete Partition
ress <F8> to agree the .icensing
49999 MB < 48568 MB free>
�44�4 MB < �44�3 MB free>
8 MB
F3=Quit
17
In this example, we