HANNspree HannsBook SN10E2 Series User Manual page 14

2. Connecting the Po�er Supp�y
The AC transformer provides external power source to your Netbook and charges the
battery pack at the same time. The AC transformer also has an auto-switching design
that can connect to any 100V AC ~240V AC power outlets.
Step 1: Plug the power cord into the power socket of the AC transformer.
Step 2: Plug the connector of the AC transformer to the DC port of Netbook.
Step 3: Plug the other end of the power cord to a live power outlet.
2
!
The power connector of the power cord for the power outlet may vary depending on the
local national standards. The appropriate connector will be bundled with your Netbook.
Please always use the connector to connect the power outlet. The connector shown here
may not match the type included in the box and is provided for reference only.
3. Startup
Step 1: Open the screen of your Netbook.
1
10
3